A1N10E-4T | A1N10E-5T | A1N10E-6T | A1N10E-7T | A1N10E-8T | A1N01E-1T | A1N01E-4T | A1N01E-5T | A1N01E-8T
» » A-100NE Fixed Speed Pumps
Flex-Pro A-100NE Fixed Speed Pumps

Flex-Pro® A-100NE Fixed Speed Pumps

Peristaltic Metering Pumps
Where to Buy:
pumpsandinstrumentation
elementsearch
Features
  • Peristaltic pump design does not have valves that can clog requiring maintenance.
  • Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
  • Outputs to 5.17 GPH (19.56 LPH).
  • Output pressures to 100 PSI (6.9 bar).
  • Output volume is not effected by changes in back pressure.
  • Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
  • Two pump tubes supplied with each pump. No extra tubing required.
  • 4 operating modes; manual on time per cycle adjustment, pulse input batching, 4-20mA on time per cycle adjustment, and 0-10v DC on time per cycle adjustment.
  • Repeating interval on-time cycle timer is programmable in seconds, minutes, hours and days resulting in near infinite turndown ratio. Example: 5 seconds on per 10 day cycle.
  • On time per cycle can be controlled via 4-20mA signal. Note: 20mA must equal maximum pump output.
  • Digital interval timer results in a high frequency of small injections per minute.
  • Durable housing of chemical resistant Valox (PBT) plastic.

Specifications:
  • Max. working pressure:100 psig (6.9 bar)
  • Max. fluid temperature: 130° F (54° C)
  • Max. ambient temperature: 14° to 110° F (-10° to 43° C)
  • Output adjustment range: Adjustable 0.1 - 99 seconds
  • Duty cycle: Continuous
  • Maximum viscosity: 5,000 Centipoise
  • Maximum suction lift: 30 ft. Water 0 psig
  • Maximum Solids: 50% by volume
  • Enclosure: NEMA 3R, (IP23)
  • Approximate shipping wt: 10 lb. (4.5 kg)
  • Voltage (max amp):
    - 115VAC/60Hz,
    14 & 30 rpm = 1.37 amp
    45 & 60 rpm = 1.87 amp

    - 230VAC/60Hz,
    14 & 30 rpm = 0.64 amp
    45 & 60 rpm = 0.74 amp

    - 220VAC/50Hz,
    14 & 30 rpm = 0.68 amp
    45 & 60 rpm = 1.14 amp

    - 240VAC/50Hz,
    14 & 30 rpm = 0.66 amp
    45 & 60 rpm = 1.04 amp

  • Power Cord Plug Type:.........115V60Hz = NEMA 5/15 (USA)
    230V60Hz = NEMA 6/15 (USA)
    220V50Hz = CEE 7/VII (EUROPE)
    240V50Hz = CEE 7/VII (EUROPE)

Popular Models:

Related Products: