Blue White Peristaltic Metering Pumps | A1N10F-4T | A1N10F-5T | A1N10F-6T | A1N10F-7T | A1N10F-8T | A1N01F-1T | A1N01F-4T | A1N01F-5T
» » A-100NF Variable Speed Pumps
A-100NF (dial knob control)

A-100NF Variable Speed Pumps

Peristaltic Metering Pumps
Where to Buy:
pumpsandinstrumentation
elementsearch
Features
  • Peristaltic pump design does not have valves that can clog requiring maintenance.
  • Self priming - even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
  • Outputs to 5.17 GPH (19.56 LPH).
  • Output pressures to 100 PSI (6.9 bar).
  • Output volume is not effected by changes in back pressure.
  • Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
  • Two pump tubes supplied with each pump. No extra tubing required.
  • Easy to use dial knob speed adjustment.
  • Built-in Tube Failure Detection system (TFD). Senses chemical in the pump head, shuts off the pump and activates an NPN open collector output.
  • Compatible with Blue-White’s output flow verification sensor system.
  • Durable housing of chemical resistant Valox (PBT) thermoplastic.

Specifications:
  • Max. working pressure: 100 psig (6.9 bar)
  • Max. fluid temperature: 130 °F (54 °C)
  • Max. ambient temperature: 14 to 110 °F (-10 to 43 °C)
  • Output adjustment range: 5-100% in 1% increments
  • Duty cycle: Continuous
  • Maximum viscosity: 5,000 Centipoise
  • Maximum suction lift: 30 ft. Water 0 psig
  • Maximum Solids: 50% by volume
  • Enclosure: NEMA 3R, (IP23)
  • Voltage (amp draw): 115VAC/60Hz, 1ph (.513 amp max)
    230VAC/60Hz, 1ph (.563 amp max)
    220VAC/50Hz, 1ph (.660 amp max)
    240VAC/50Hz, 1ph (.585 amp max)
  • Power Cord Plug Type: 115V60Hz = NEMA 5/15 (USA)
    230V60Hz = NEMA 6/15 (USA)
    220V50Hz = CEE 7/VII (EUROPE)
    240V50Hz = CEE 7/VII (EUROPE)
  • Approximate shipping wt: 12 lb. (5.4 kg)

Popular Models:

Related Products: